Comment installer un parachute sur un drone multirotor

Comment installer un parachute sur un drone multirotor

If you've never installed a parachute on a drone you may wonder what's the best way to fix it to your aircraft. Here's some inspiration.

It's hard to find a system that "fits them all" given the wide variety of multirotors, you also have to take into account the numerous custom builds. Some have square arms, some have them round. Some have a plate where you can screw a parachute but others don't have that much space left. You must be careful not to obstruct the GPS "view". 

Most parachute manufacturers provides mounting systems but they all vary greatly, let's take a look at the most commmon ones.

Frenchidrone DJI Inspire dual MARS 58 drone parachute rear view

Here is a DJI Inspire with two MARS 58 Parachutes mounted on each side by Frenchidrone. They are triggered at the same time via a dedicated link to comply with new french regulations.

MARS parachute MARS mini on DJI Phantom with MARS Phantom mount

MARS Mini parachute mounted to a DJI Phantom with the MARS Mini Phantom mount. Designed specifically for the Phantom it takes no more than five minutes to install.

MARS Mini quick release drone parachute mount

The MARS Mini can also be mounted with a special quick release mount that allows the parachute to be installed and removed in a snap.

MARS Lite drone parachute mount for Phantom

The MARS Lite comes bundled with its own mounting system which can be installed between the legs and the bottom shell of the DJI Phantom.

MARS 58 mounting holes drone parachute

The MARS 58 has 8 mounting holes. Four 3mm holes with 25mm spacing and four 4mm holes with 30mm spacing. 

mars 58 parachute mount for dji inspire

The DJI Inspire mount for MARS 58 provides a quick and clean installation.

 

Sky-Hero Spyder with Opale Paramodels drone Parachute

This is a Sky-Hero Spyder with a Opale Paramodels parachute, probably 1.8 or 2.5m² held by its pod on the Opale ejection system. The system eject the parachute with rubber bands.

skyhero opale drone parachute uav

Another look at the Opale ejection system on the Sky-Hero.

parachute drone opale paramodels dji s900

Opale parachute with ejection system mounted on a DJI S900.

Parachute pour drone Opale Paramodels on DJI S800

And again a Opale parachute with ejection system here mounted on Air Drone Savoie's DJI S800. The double black strap going into the pod is connected to the aircarft's frame.

MARS 120 drone parachute mounted on Cinestar 8

This one is a MARS Parachute 120 v1 (old version now replaced by the 120 v2) mounted on a big Cinestar 8 lifting heavy and pricey cameras.

Flying Eye S900 with top mounted drone parachute

This parachute is mounted on DJI S900 modified by Flying Eye. It can be activated via a circuit breaker to comply with new french regulation for S3 scenario (S3 = flight in urban area). The Parachute comes from Rebel Space and is deployed by a CO2 canister.

Rebel Space drone parachute

Rebel Space dual parachute system mounted on two arms of Flying Eye's CineCopter.

Gryphon Skycat drone parachute

Dual Skycat X68 on Aeria's Gryphon Dynamics X8 frame carrying a Panasonic GH4. The parachute launcher is simply strapped to a plastic holder making it easy to remove the system for easier transportation or removing a bit of weight from the aircraft.

Skycat drone parachuteSkycat Launcher mounted on a rectangular arm with a custome mount. The mount does not need to be very strong as the parachute is always connected directly to the aircraft (white ropes on the picture above). This system also has the advantage to be easily removable.

Skycat drone parachute mounted on a multirotor

 Another Skycat launcher simply strapped to its carbon mount. Below is the trigger unit (green board).

Skycat drone parachute bicycle bottle holder mount

Bicycle bottle holder used as a mount for a Skycat launcher.

Skycat X55 Carbon Fiber drone parachute launcher bottom mounting holes

Skycat X55 carbon fiber launcher bottom mounting holes.

Skycat X68 Carbon Fiber drone parachute launcher bottom mounting holes

Skycat X68 carbon fiber launcher bottom mounting holes.

Skycat X68 standard drone parachute launcher bottom mounting holes

Skycat X68 standard launcher bottom mounting holes.

zerotech highone parachute drone

Zero Tech parachute for Zero Tech High One UAV. This system can be directly bolted to the aircraft center plate. Like on Skycat systems the lines connect the parachute directly to the aircraft in several points. This parachute can be deployed automatically by the Zero Tech flight controllers.

Frenchidrone Dual MARS 58 parachutes on octocopter

Two MARS 58 parachutes mounted on a Frenchidrone CinestarK 8 Dragon. Two parachutes aren't too much to slow down this 12kg AUW aircraft.

MARS 58 drone parachute Vulcan Hexa

MARS 58 Parachute bolted directly on the arm of a Vulcan hexa frame.

Don't hesitate to submit your own pictures at contact@parachutedrone.com or leave a comment !

Posted on 26/07/2015 by Gaël Billon 0 12454
Tag: Mount

Leave a CommentLeave a Reply

Prev
Next

No products

To be determined Shipping
0,00 € Total

Check out